電梯門套的特點和安裝？電梯門套對電梯起到裝飾的作用，那么它的特點如何，今天就來跟大家講一下。

　　What are the characteristics and installation of elevator door frames? Elevator door frames play a decorative role in elevators, so what are their characteristics? Today, we will talk about them.

　　特點：

　　Features:

　　1、采用表面特殊處理和轉印技術，優于大理石自然紋理及色澤，長久保持光亮。

　　1. Adopting special surface treatment and transfer printing technology, it is superior to the natural texture and color of marble, and maintains brightness for a long time.

　　2、采用全新符合技術，莫氏硬度達到5.0以上，耐磨抗壓彎。

　　2. Adopting brand new technology, the Mohs hardness reaches 5.0 or above, and it is wear-resistant and compressive bending resistant.

　　3、電梯門套線條造型豐滿度高，用在電梯套可達到與石材相媲美的自然融合。

　　3. The elevator door frame has a high degree of fullness in its line shape, which can achieve a natural fusion comparable to stone when used in elevator frames.

　　4、每一根線條背面都有免釘膠凹槽設計，安裝方便，避免用膠溢出影響美觀。

　　4. Each line has a nail free groove design on the back, which is easy to install and prevents glue from overflowing and affecting the appearance.

　　5、由于電梯套線比較重，設計為孔狀減輕重量。

　　5. Due to the heavy weight of the elevator wiring, it is designed in a hole shape to reduce weight.

　　6、具有較強的防水防火性能，細膩觸感，整體搭配效果好。

　　6. Has strong waterproof and fireproof performance, delicate touch, and good overall matching effect.

　　安裝步驟：

　　Installation steps:

　　1、線條選材：挑選設計好的規格和花色的線條，根據用戶的要求可選擇硬度和韌性有所區別的線條。

　　1. Line material selection: Select lines of well-designed specifications and colors, and choose lines with different hardness and toughness according to user requirements.

　　2、電梯門套側板挑選：選擇完線條后，選擇花色與線條一樣或搭配的板材3、切割：如定制生產的板材或線條或減少切割頻率，但如果是主流尺寸，在現場無法直接使用，則需要根據自己的實際尺寸進行切割和剪裁。

　　2. Selection of elevator door frame side panels: After selecting the lines, choose panels with the same pattern or matching with the lines. 3. Cutting: For customized production of panels or lines, or reduce cutting frequency. However, if it is a mainstream size that cannot be directly used on site, it is necessary to cut and cut according to your actual size.

　　4、墻面預處理：將墻面進行清潔處理，清理干凈墻面的毛刺、浮塵，有坑洼的地方需要找平。

　　4. Wall pre-treatment: Clean the wall to remove burrs and floating dust, and level any potholes.

　　5、結構膠點沾：在切割好的線條和板材背面使用結構膠均勻點沾，為保證牢固度，用膠密度可根據實際情況調整。

　　5. Structural adhesive spot sticking: Apply structural adhesive evenly to the cut lines and the back of the board. To ensure firmness, the adhesive density can be adjusted according to the actual situation.

　　6、安裝：按照設計好的位置，將涂抹好的結構膠電梯門套按壓到上面，拼接好形狀，包裝受力均勻。

　　6. Installation: According to the designed position, press the applied structural adhesive elevator door cover onto it, assemble the shape, and ensure even packaging stress.

　　7、清潔：安裝完畢后，用濕布清潔整個電梯門套，三天后撕掉保護膜。

　　7. Cleaning: After installation, clean the entire elevator door cover with a damp cloth, and after three days, remove the protective film.

　　本文由淄博電梯門套廠家提供技術支持，更多的詳細精彩內容請點擊我們的網站http://www.om336.cn，我們將會全心全意為您提供滿意的服務。

　　This article is supported by Zibo elevator door frame manufacturers. For more detailed and exciting content, please click on our website http://www.om336.cn We will wholeheartedly provide you with satisfactory service.